Here we discuss the TP link login to router. TP-link router contains High-Speed Cable Modems, wireless routers, mobile phones, ADSL, range extenders, routers, switches, IP cameras, powerline adapters. TP-Link also assembles the On Hub router for Google.

 Some Features of TP –Link Router

• TP–Link Archer C6 Gigabit MU-MIMO Wireless Router
• Dual Band 1200 Mbps Wi-Fi Speed,
• 5 Gigabit Ports,
• 4 External Antennas
• 1 Internal Antenna Wi-Fi Coverage with Access Point Mode,

TP-Link Router Login

To keep your network secure and to minimize threats changing your router’s TP-Link password is an essential way. 

But first, let’s get you connected to the TP-Link Network.

Note: – TP-Link router is must and any of the listed devices to connect to the TP-Link login page. 

• Computer
• Tablet
• Mobile Device
• Laptop

TP-Link Login Steps

To configuration on your TP-Link router, you have to be logged in. 

Connect to the TP-Link Network

• Firstly connect to the network that reach the TP-Link login IP and its control panel.
• To connect to the TP-Link network, you need to wireless or wired medium. 
• If you don’t remember the Wi-Fi password, then good solution is to connect to the network using an Ethernet cable. It does not need a password. 

TP-Link Router Setup

Here are some steps to follow

• Firstly, Power on the router and connect your PC to the router by using an Ethernet cable.
• Then, when it is connected, open an internet browser and head over to 192.168.0.1 or https://tplink-repeater.net/
• After that, set your router login password by entering it twice.
• And, Click on Let’s Get Started/Login.
• Follow the on-screen instructions and configure your Internet and Wireless Network using the Quick Setup option.
• After this, enter the name (SSID) for your Wireless Network in the given field and also, set a password to secure your Wi-Fi network.
• At last, you can complete the procedure, after which you will be able to join the Wireless Connection with the SSID using your password.

Connect to the TP-Link Router IP via Browser

• First of all, open any browser which you want to open.
• Then, type your router IP or TP-Link login IP in the address bar.
• Moreover, the most important IP addresses for TP-Link router login are 192.168.0.1 and 192.168.0.254.
• Furthermore, to directly reach your router’s designated TP-Link login click on the links given below.
• If neither of these IP addresses works as your TP-Link login IP address, you can find a custom list for different router models.
• You can visit the TP-Link login net website. Since you already have a network connection to the TP-Link server, you can use any online tool to find the router IP. 

Reset your TP-Link Router

To initiate a total TP-Link reset, follow these steps:-

1: Locate the Reset Button

First step is to be you may locate the reset button at the backside of your TP-Link router. For some models, the button may also stick out. In sporadic cases, the WPS button may act as the reset button when using the reset sequence.

Either way, find the button and move on to the next step.

2: Press & Hold the Reset Button

Press and hold the reset button implies that with the router powered on, keep the reset button pressed for 30 seconds. Without releasing the button, turn off the power supply and hold it for another 30 seconds. While still holding the TP-Link reset button, turn on the power and hold it for another 30 seconds. You have successfully reset your TP-Link router to its factory settings.