Find IP address of TP-Link and change IP address Router. To manage your TP-Link Router you may fail to access via http://tplinkwifi.net and wish to access the Router’s IP address directly. Usually, this is http://192.168.0.1 or http://192.168.1.1 your TP-Link Router’s default IP addresses.
In this article we will solve this issue Find IP address of TP-Link and change IP address Router:
In case your network manager have change it then, follow the beneath steps to find your TP-Link Router’s IP address.
- Firstly open Control Panel.
- Then you will see on the top right, select to view by Category.
- After that in the network and internet category click to View network status and tasks.
- Further click on your network connections.
- Now in the network status window click to Details.
- Here you will see your router’s IP address show as IPv4 Default Gateway.
Change your IP address of TP-Link Wireless router
To change your IP address of TP-Link Wireless router, follow the beneath steps:
Step 1: Firstly from your device launch any web browser and in the address bar enter the IP address 192.168.0.1 of router.
Step 2: Then you will see the log in page.
Step 3: Here enter the username and password default admin and password is blank (nothing).
Step 4: Once done the click on Log In.
Step 5: Now click on Setup > Network Settings.
Step 6: Here under Router Settings, enter in the subnet mask and router´s new IP address.
Step 7: The IP Address that’s configured here is that the IP Address that you simply use to access the Web-based management interface.
Note: In case you change the IP Address then, first you need to modify your device´s network settings to access the network again. (You can do that by disconnecting and reconnecting to the network)
Step 8: Finally Click on Save Settings.
