TP link extender ac1750 has been most popular device in the realm of Wi-Fi routers, range extenders, and other network devices.
Reset TP-Link extender AC1750 is because of specific issues you may be facing with your device.
You may be attempting to determine the issues with your TP-Link extender AC1750 following a host of methods. However, few issues cannot be solved because you do not make out what exactly is causing the trouble. In such circumstances, resetting it to the factory defaults would be the only possible resolution. The second reason to reset your TP-Link extender is in a situation where you have forgotten the administrator username and password. In such a situation, you would not be able to access the settings and change the other connectivity settings. Resetting your range extender will assist you make a fresh start in terms of setting up your device.
How to reset TP-Link Extender?
To reset a TP-Link extender ac1750 is a simple and easy to operate. TP-Link gives guidelines on how to reset your TP-Link extenders without any problem. There are 2 methods to reset the TP link Extender
Method 1 –
If your extender comes with a reset button if your range extender comes with a reset button, you may proceed. Follow the steps here below –
- Firstly power on your TP-Link extender AC1750.
- Then, locate the reset button at the rear of your device.
- And press and hold the button for some seconds.
- Release the button once the range extender reboots.
Now extender is reset to the factory default settings. You have to find the lights flashing and then going off. You can log in to the administrator panel using the default username and password and confirm the changes.
Method 2 –
This method is used for the select few range extenders from TP-Link that do not come with a reset button. However, these range extenders do have a reset option, and you will need a pin or similar object to reset your device.
The technique includes a hidden reset option. You will need to use a pin or similar sharp object to press and hold the reset switch. You can keep it for around 8 to 10 seconds. Check the lights flashing and coming back on one by one gradually.
Once all the lights are steady, and the range extender has rebooted, it will be back to the factory default settings.
How to configure your TP-Link Range Extender after it is hard to reset?
You have to find the default username and password for the administrator page on your TP-Link extender on the instruction manual that come with your device. The default username and password are admin and admin, respectively. You can change it to any other value of your choice after logging in for the first time after the reset.
You have already set up and configured all the physical configurations on the device. Connect to your router and follow the following steps –
- Firstly, launch any web browser and visit the address 192.168.1.1,
- Then, Log in to your administrator page.
- Moreover, use the default username and password. It will be admin and admin, respectively. Check the label on your router or the instruction manual for the exact information.
Find the pinhole on the side of the device where the reset button is located. After inserting a pin, push and hold the reset button until all indicator lights turn on for a brief duration. Reset the range extender to factory default settings now.
Absolutely! That’s what the hard reset is for. Simply follow the steps mentioned above.
This can be a real head-scratcher. Ensure you’ve checked power supplies, cable connections, and the device’s placement. If all else fails, contact TP-Link support.
Well, there’s no hard and fast rule. If it ain’t broke, don’t fix it. But if you start noticing consistent connection issues, a reset might be in order.