Setup TP- link AC750 Extender

In this phrase we will discuss about Setup TP-Link AC750 extender. TP-Link AC750 Wi-Fi range extender helps to boost wireless signal to previously dead zone area or hard-to-wire areas effortlessly. TP-link is also compatible with 802.11b/g/n and 802.11ac Wi-Fi devices. TP-link AC750 has dual band which increase and boost the speed up to 750Mbps. AC750 is also ideal for HD video streaming, online gaming and other bandwidth-intensive tasks.Wireless AC technology makes powerful Wi-Fi connections all over your home. Also work with any standard router or access point, making it appropriate to make it wide, Dual-Band Wi-Fi to multiple devices.

Setup TP- link AC750 Extender
TP-Link AC750 Extender

Setup TP-link AC750 Extender via http//tplinkrepeater.net

  1. Firstly make sure to plug in your TP-Link extender to wall socket closer to your router.
  2. Then hold on till the Power LED and other LEDs light up.
  3. Now connect your device to extender’s network SSID called TP-LINK_Extender_2.4GHz/5GHz.
  4. Further from your connected device open any web browser and in the address bar enter http://tplinkrepeater.net.
  5. Now you will see the login page here enter the username and password as admin to login.
  6. Then go for quick wizard to configure your extender.
  7. Once done then select your router’s 2.4 GHz/5Ghz band network and click to Next.

Note: In case your router does not support 5GHz band then click Skip to continue.

  • Moreover select the Wi-Fi security option and enter the password.
  • Either kept the same default SSID or created if any for the extender network and click to NEXT.
  • Lastly verify your Wi-Fi setting and click to Finish and hold on till the LED light up.
  • Now unplug your extender and place it mid-way between your router and the place where you want to extend the network. We recommendto place within range of your existing router network.
  • Finally hold on till the extender to reconnect and LED to turn green.

Note: In case LED does not light up then bring extender more closely to router.

Setup TP-Link AC750 Extender via WPS

  1. Firstly make sure to plug in your extender into wall socket closer to your existing router.
  2. And hold on till the power LED and other LEDs to light up.
  3. Now press and hold the WPS button on your router and meanwhile in the same time within 2 minutes press on extender also.
  4. Then in case you are connecting the extender to a dual band router but only 2.4GHz or 5GHz LED is on, must repeat step 3 to connect the other band.
  5. Once the process is done then unplug the extender and place it mid-way between router and the place where you want to extend your network. We recommend to place in range of your router network.
  6. Finally hold on till the extender to reconnect and LED to turn up green.
  7. In case LED does not showed up then bring extender closer to router.

Troubleshooting Common Issues

Setting up your TP-Link AC750 Extender should be straightforward, but you may encounter some common issues along the way. Here’s how to troubleshoot them:

Extender Not Turning On

  • Ensure the extender is plugged in and receiving power.
  • Check that the power outlet is functioning.
  • Verify that the power adapter is securely connected.

No Wi-Fi Signal

  • Ensure the extender is within the range of your router.
  • Make sure the extender’s LED lights are on.
  • Reboot the extender if needed.

Connectivity Problems

  • Double-check the Wi-Fi network name (SSID) and password.
  • Verify that you have chosen the correct setup method (WPS, web browser, or manual).
  • Reset the extender to factory defaults and start the setup process again.

Forgotten Admin Password

  • Press and hold the Reset button on your extender for 10 seconds to restore the factory default settings.
  • Reconfigure your extender from scratch.

App for TP-Link AC750

The App for TP-Link AC750 is TP-Link Tether App. To setup TP-Link AC750 via app follow the beneath steps:

  • Firstly download the app TP-Link Tether fromGoogle play or Apple store.
  • After that enable the TP-Link Tether and search the range extender in the device list.
  • Lastly click range extender and then it’s easy to manage

Default IP address for TP-link AC750

Mostly the default IP address for AC750 is 192.168.0.1 or 192.168.1.1. But at times when you access the http:tplinkwifi.net and you may find that this isn’t working to manage your TP-Link Router then you would like to access the Router’s IP address directly. So your TP-Link Router’s default IP address is http://192.168.0.1 or http://192.168.1.1.

FAQs

Can I use the extender with any router?

Yes, the TP-Link AC750 Extender is compatible with most routers.

What is the range of the extender?

The range can vary, but it typically covers up to 2,500 square feet.

Can I change the extender’s network name and password?

Yes, you can customize the settings during the setup process.

How do I update the extender’s firmware?

Visit TP-Link’s official website for firmware updates and follow the instructions provided.

What if I forget my Wi-Fi password?

You can usually find it on a sticker on your router or in your router’s settings.

Setting up your TP-Link AC750 Extender doesn’t have to be a daunting task. Whether you choose the WPS method, web browser setup, or manual configuration, this guide has provided you with the step-by-step instructions you need. Say goodbye to Wi-Fi dead zones and enjoy a seamless internet experience in every corner of your home or office.

Tags: , , , , , , ,

Leave a Reply