TP-Link RE220 AC750 range extender helps to boost the network. It also helps to abolish the dead zone areas from your home/office. The supply dual band Wi-Fi connections with integrate speed up to 750Mbps and also have gigabit wire. Also RE220 is well renowned for its security features and you can enjoy online gaming, smart TV, listening to music and watch HD videos. RE220 is very easy to set up and effortlessly done with three methods, web domain, WPS and Tether App. RE220 also set up as an Access Point. The Tether app is used as smart management of the device.

TP-Link RE220 Setup Range Extender with Web Domain

1. Firstly need to unbox TP-Link RE220 Range extender.
2. Now set the extender in the right direction.
3. Then connect the adapter with extender.
4. Check the extender is powered on.
5. Now just join the laptop, modem and the extender with Ethernet Cables.
6. Further from your connected device and open any web browser, in the address bar type www.tplinkrepeater.net or 192.168.0.254 and click enter.
7. Then you will see the login page here enter the credentials username and password as admin.
8. Moreover select your country, time and the language on setup wizard.
9. Here select your country, time and language.
10. Now it will automatically scan your available list of Wi-Fi in your area.
11. Among that list select your main Wi-Fi and enter the password.
12. Setup for TP-Link extender is successfully done.

TP-Link RE220 Setup Range Extender with WPS

1. Firstly unbox the TP-Link RE220 extender.
2. Now set the extender and place it close to router.
3. Here check your internet signals, in case you find it not steady then fix it.
4. Now plug in your extender to power socket near to router.
5. Further press and hold the WPS button on the extender and in the same time within two minutes press and hold on router also.
6. If you see the LED is blinking that indicates both device are connected.
7. Moreover it will start catching the settings and the LED also starts blinking.
8. Finally your TP-Link extender is successfully setup.

TP-Link RE220 Range extender setup via Tether App

1. Firstly you need to unbox TL-WA860RE extender.
2. Now place at right place and close to router.
3. Then check your signal, if any issue fix it.
4. Make sure to plug in your extender and check the LED on extender is on.
5. Then from your connected device open any play store and search Tether app and download it.
6. Further you will find a QR code on the extender scan it.
7. Then it will start catching the settings.
8. Finally the extender is setup and ready to boost your network.

Login to TP-Link RE220 Range Extender

1. Firstly from your device open any web browser and type www.tplinkkrepeater.net or 192.168.0.254 in the address bar and click enter.
2. Then login page will appears and here enter username and password as admin.
3. Finally you can access the settings of the extender.

Setup TP-Link RE220 Range Extender as Access Point Mode

1. First from your connected device open any web browser and in the address bar enter www.tplinkrepeater.net or 198.168.0.254.
2. Then you the login page will display here enter the username and password as admin and click to login.
3. After that click on Advance setting<wireless settings.
4. Then go to admin.
5. Now search the mode access point and click on it.
6. Finally you are successfully enabled Access point mode.
7. Now extender is used as Access Point.

TP-Link RE220 Range Extender Firmware update

1. Firstly from your device open any web browser and in the address bar enter www.tplinkrepeater.net or 192.168.0.254.
2. Then the log in page will display, here enter the username and password as admin.
3. Now click to advanced settings> firmware update.
4. Lastly you can now utilize the updated firmware update.

TP-Link RE220 Range Extender firmware update via Tether App

1. First from your device open play store.
2. Now search for Tether app and download it.
3. Then open the app and fill all the information of the extender and click on settings.
4. Click on Firmware update.
5. Lastly you can use the latest firmware with security cover.

TP-Link RE220 Range Extender Soft Reset

1. First open any web browser from your device.
2. Then enter www.tplinkrepeater.net or 192.168.0.254 in the address bar and click to enter.
3. Now the login page displays, enter the credentials as admin and click to log in.
4. After that click on advanced settings and further click on factory reset.
5. Further your extender is in the default settings.
6. So here again set up your extender with same method.

TP-Link RE220 Range Extender Hard Reset

1. Firstly search the reset button on the extender.
2. Then take the paper clip or pin and press & hold the reset button.
3. Now you find the LED starts blinking then release the reset button.
4. Now you will find the lights get steady.
5. Then your TP-Link extender is in default setting.
6. Lastly now again set up the extender.