TP-LINK RE500 Range Extender Firmware updates (AC1900)

TP-Link RE500 Range extender goes around with four fixed antennas. TP-Link RE500 Range Extender provides the speed of the AC1900 (600 MBPS on 2.4 GHz + 1300 MBPS on 5 GHz). With the help of MU-MIMO, you can transfer all data to many devices. Also, you can get the target Wi-Fi signal to each connected device. Also, with the help of the Gigabit Ethernet port users can attach many devices. The user can also locate a good location with the help of the signal lights.

SETUP OF THE TP-LINK RE500 RANGE EXTENDER WITH WWW.TPLINKREPEATER.NET

• Firstly, place the TP-Link RE500 range extender at the right location.
• Switch on the router and also check your web connection.
• Fix it again if the internet has unstable signals.
• Then, attach the power adapter to the extender and turn on the extender.
• On the off chance that the lights are on, it implies the user can set up the extender now.
• Use www.tplinkrepeater.net or the IP address is 192.168.0.245.
• Users can use the username and password as the admin.
• After that, the user can see there is a setup wizard on the screen.
• Then select the country from the list and also select the language and time.
• Scan the WiFi.
• If scanning fails, then you can enter manually.
• Select the network name or SSID for 2.4 GHz and 5 GHz.
• Also, enter the router’s network name (SSID).
• The user can also name the extender network, Tap next and save all the settings.
• In the end, you are now connected to the extender.

WI-FI PROTECTED SETUP OF THE TP-LINK RE500 RANGE EXTENDER

• Firstly, place the extender closer to the router.
• Then, attach the power supply and turn on the extender.
• Press the power button of the extender if the extender does not turn on.
• Use the same network for the router and extender.
• Then, search for the WPS button on the extender and the router.
• The user can press the WPS button on the extender then the LED starts flickering.
• Within two seconds, you can press the WPS buttons on the router.
• Now the LED lights of the extender come strongly it implies they are connected.
• You can repeat the same process if LED lights are not stable.

TETHER APP SETUP OF TP-LINK RE500 RANGE EXTENDER

• Firstly, download the TP-link Tether app from the play store.
• Then, place the extender closer to the router.
• The extender is connected to the power supply and the power of the extender is on.
• The user can press the power button of the extender. If the power of the extender is not on.
• Users can also use the same network for an extender
• Then, Open the Tether app.
• In the app enter the information of the extender.
• After that, scan the QR code of the extender.
• It starts taking the configuration of the settings.
• You can use the extender now.

LOG INTO THE TP-LINK RE500 RANGE EXTENDER

• Firstly, Open the Internet browser.
• And write www.tplinkrepeater.net or the IP address is 192.168.0.254.
• Use the username and the admin and the password as the admin.

Now you can access the settings.

FIRMWARE UPDATE OF THE TP-LINK RE500 RANGE EXTENDER WITH WEB DOMAIN

• First of all open the internet browser.
• write www.tplinkrepeater.net or the IP address is 192.168.0.254
• Use the username as the admin and the password as the admin.
• Then, Hit on the advance settings.
• Then, Firmware’s updated and clicks it.
• Just wait for two seconds.
• At last, the user has the updated firmware.

FIRMWARE UPDATE OF THE TP-LINK RE500 RANGE EXTENDER WITH TETHER APP 

• Firstly, download the TP-link Tether app from the play store.
• Type in the details of the extender.
• After that, the user can now tap on the settings.
• Then, click on the firmware update.
• You can get the message for the latest firmware.
• You now have the latest firmware.

FIRMWARE UPDATE OF THE TP-LINK RE500 RANGE EXTENDER MANUALLY 

• Firstly, connect the computer and the extender.
• Both devices use the same network.
• Open the internet browser.
• Go to the official website of the TP-link.
• Click on the download center.
• Enter the name and the model of the extender.
• Then, search for the latest firmware.
• Moreover, the last digits tell you the date of the release.
• The user can download the latest firmware.
• After this, save the file on the computer.
• Enter www.tplinkrepeater.net in the web browser.
• Type the username as the admin and the password as the admin.
• In the advanced settings, go to the system tool.
• Click to upload the firmware.
• Turn off your computer till the process is completed.
• After this, the user has the latest firmware.

RESET OF THE TP-LINK RE500 RANGE EXTENDER WITH WEB DOMAIN

• Open the internet browser.
• write to www.tplinkrepeater.net or the IP address is 192.168.0.254.
• Use the username as the admin and the password as the admin.
• Tap on the advanced settings.
• Hit the factory reset.
•  To reset the process, it will take 2 seconds.
• The extender is in the default settings.
• After this, repeat the setup process for the use of the extender.

HARD RESET OF THE TP-LINK RE500 RANGE EXTENDER

• Firstly, search for the reset button on the extender.
• The paper clip pushes the reset button on the extender for two seconds.
• Then, lights are flashing.
• Release the reset button of the extender.
• After that, the lights are stable.
• The extender is in the default settings.

For setup, users have to repeat the same process.

FAQs

In conclusion, the TP-LINK RE500 Range Extender is a valuable tool to eliminate Wi-Fi dead zones and boost your network’s coverage. Whether you choose the hassle-free WPS setup, the web browser method, or manual configuration with an Ethernet cable, you’re on your way to a stronger, more reliable Wi-Fi signal. Say goodbye to buffering and dropped connections, and enjoy seamless browsing and streaming with your TP-LINK RE500.