NEW EXTENDER SETUP
TP-LINK

Setup Tp-link repeater using tplinkrepeater.net?

To set up your TP-Link repeater, go to http://tplinkrepeater.net. TP-Link extenders have an easy-to-use web interface—tplinkrepeater.net lets you quickly configure and extend your WiFi network in just a few steps. The setup page is simple, so any user can follow along without hassle. TP-Link repeaters stand out for their reliable coverage, affordable pricing, and sleek, compact design. They’re built to fit into any home or office and work well for basic WiFi extension or more demanding environments. Whether you need stronger WiFi at home or extra coverage in a small business, TP-Link offers a variety of wireless extenders to match nearly any setup.

Tplinkrepeater.net setup page

Setup tp link repeater via tplinkrepeater.net or 192.168.0.254

You can easily connect your TP-Link extender to your router and extend your network’s coverage throughout your home or office. Just follow these steps:

    1. Power on your TP-Link extender. Wait until the LED lights up—this means it’s ready for setup.

    2. Connect your device to the TP-Link extender’s WiFi (SSID).

    3. Open a web browser and type tplinkrepeater.net or 192.168.0.254 in the address bar. Press Enter.

    4. The extender’s login page will appear and scan for nearby WiFi networks. Select your main WiFi network.

    5. Choose your network’s 2.4GHz and 5GHz SSIDs if prompted.

    6. Enter your router’s WiFi password to allow the extender to connect.

    7. Set a new WiFi name and password for your TP-Link extender, then save the settings.

    That’s it—your TP-Link extender is now set up and boosting your network range, even reaching dead zones.

Setup your Tp link with easy WPS - Push button method

Setup Tp-Link extender using WPS (Wi-Fi protected setup) method. TP-Link’s Wi-Fi Range Extenders helps in abolishing the dead zone areas from home/office by buildup wireless signals and enlarge networks up to 10000 square feet. Range extender mode helps to boosts wireless signal to earlier unreachable or hard-to-wire areas effortlessly. The Miniature size and wall-mounted design makes Tp-Link extender very easy to locate and move flexibly. And make the Tp Link extender setup effortless. Also the Ethernet port allows the Tp-Link to perform as wireless adapter. And the LED control function makes the Tp-Link a Night mode for peaceful sleep. The App makes it easy to access and management using any mobile device.

  • Firstly make sure to turn on and place your Tp Link WiFi extender closer to your existing router.
  • Then press and hold the WPS button on the Tp-Link extender.
  • Meanwhile at the same time within 2 minutes press and hold the WPS button on router also.
  • Hold on till device get connected, if still having issue then click http://tplinkrepeater.net.
  • Once done then LED WiFi turns to solid on the Tp Link extender.
  • Now just simply connect to your extender network using the default username and password.
  • Finally your Tp Link extender setup is successfully done.
Tp links extender wps button Setup
Tp Link tether App setup

SETUP OF TP-LINK AC750 RANGE EXTENDER WITH TETHER APP​

TP link AC750 Range extender provides to boost your current Wi-Fi network. It goes around with external antennas, so it covers every corner of your house. It provides the speed up to 300Mbps. Also you can get the MU-MIMO feature, and you also move files to numerous devices. You can use the tether app to manage all devices.

  • Select the spot for the extender and connect the antennas.
  • Check the signals of the internet.
  • Then, attach the power adapter with the extender.
  • Check the power of the extender is on.
  • The user sees the power off then holds the on/off button of the extender.
  • Download & install the Tether app.
  • Then, write the details of the extender.
  • Now, scan the QR code now.
  • At the end, enjoy the latest extender. 

LOG INTO THE TP-LINK WiFi RANGE EXTENDER

  • Open any internet browser.
  • And write www.tplinkrepeater.net or the IP address is 192.168.0.254.
  • Use the username and the password as the admin.
  • Then, log into the settings.

How to FIRMWARE UPDATE OF TP-LINK RANGE EXTENDER

  • Firstly, open the internet browser.
  • And write www.tplinkrepeater.net or the IP address.
  • Use the username and the password as the admin.
  • Tap on the advance settings.
  • Then, hit on the firmware update. 
  • After this, user can use the latest firmware of the extender.
FIRMWARE UPDATE OF TP-LINK WiFi RANGE EXTENDER WITH TETHER APP
  • Launch the play store on your device.
  • Then, download the Tether app from the play store.
  • And write the information on the extender.
  • Tap on the settings and click on the Tp link firmware update.
  • After that, user can get the message for the latest firmware.
  • At the end, you have the latest firmware of the extender with security patches.
  • Open the Internet browser.
  • And write www.tplinkrepeater.net or the IP address.
  • Then, apply the username and the password as the admin.
  • Tap on the advanced settings.
  • Hit on the factory reset.
  • To reset process it takes some time.
  • Now, TP-link extender is in the default settings.
  • Moreover, the user can again set up the extender.
  • Firstly, search the reset button on the extender.
  • Push the reset button for two seconds by using the paper clip
  • After that, Lights are flashing.
  • Release the reset button.
  • Then, lights are calm.
  •  The extender is in default settings.
  • And Set up the extender again.
SETUP OF TP-LINKTL-WA855RE RANGE EXTENDER WITH URL tplinkrepeater.net
  • Firstly, locate the place the extender at that location.
  • Then, check your network.
  • Fix it if it is not working
  • Unplug the modem.
  • You can attach the antennas with the extender.
  • Moreover attach the power switch with the extender and switch on the power.
  • The user can hold the on/off button of the extender. If extender is not working.
  • Then check the power of the router is on.
  • Now join the modem, extender, and laptop.
  • After this, use the Ethernet cable to join all devices.
  • Open the internet browser.
  • And write www.tplinkrepeater.net or the IP address is 192.168.0.254.
  • Use the username and the password as the admin.
  • After that, the user can see there is setup wizard on the screen.
  • Then select the country from the list and also select the language and time.
  • Scan the Wi-Fi.
  • If the scanning does not finished, the user can also enter the Wi-Fi.
  • Then enjoy your new extender.

Disclaimer- tplink-repeater.net is an Independent Technical Blog. Any kind of use of products, Trademark, Services and Brands are just for educational purpose. tplink-repeater.net has no affiliation or certification with any of company unless such bond is expressly specified. You can visit the Official Website for any kind of Technical Support.