In this article, we will discuss configure TP Link RE400 Extender. TP-Link RE400 range extender helps to boost the network. Also, offer the good performance of extender and get speed up to 300Mbps on 2.4GHz and 1300Mbps on 5GHz. It also helps to abolish the dead zone areas from your home/office. Also, Re400 is well renowned for its security features and signals help to serve the network at every corner of the home/office. The extender has gigabit external ports as a wireless adapter. RE400 is very easy to set up and effortlessly done with three methods, web domain, WPS, and Tether App. The Tether app is used as smart management of the device.

TP-Link RE400 Extender setup via web domain

1. Firstly need to unbox the TP-Link RE400 Range extender.
2. Now attach the antennas with extender and set the extender in the right direction.
3. Ensure the internet signals, in case the signals are not steady then try to stable it.
4. Further connect modem, PC, and extender with the Ethernet port.
5. Then from your connected device and open any web browser, in the address bar type http://tplinkrepeater.net or 192.168.0.254 and click enter.
6. Now you will see the login page here enter the credentials username and password as admin.
7. Moreover select your country, time, and language on the setup wizard.
8. Here it will automatically scan your available list of Wi-Fi in your area.
9. Among that list select your main Wi-Fi and enter the password.
10. Finally, setup for TP-Link extender is successfully done.

TP-Link RE400 Extender setup via WPS

1. Firstly unbox the TP-Link RE400 extender.
2. Then attach the antennas with extender and place it close to router.
3. Now check your internet signals, in case you find it not steady then fix it.
4. Here plug in your extender to power socket.
5. You need to check power on both the extender and router.
6. Moreover press and hold the WPS button on the extender and in the same time within two minutes press and hold on router also.
7. Further it will start catching the settings and the LED also starts blinking.

Congrats! You successfully configure TP Link RE400 extender.

RE400 Extender setup via Tether App

1. Firstly unbox the TP-Link RE400 extender.
2. Ensure to plug in your extender and check the LED on extender is on.
3. Now from your connected device open any play store and search Tether app and download it.
4. Then open the Tether App and enter all the details of extender.
5. Here you will find a QR code on the extender scan it.
6. Lastly it will start catching the settings.
7. Finally the extender is setup and ready to boost your network.