Setup the TP-Link RE650 extender at your home to get powerful Wi-Fi performance. The TP-Link range extender RE650 can boost Wi-Fi bandwidth and deliver maximum speeds of up to 800 Mbps on 2.4GHz and 1733 Mbps on 5GHz. You can easily monitor the state of the Tplink RE650, control its functions, and update its settings using your mobile device.

How to Set Up a TP-LINK RE650 AC2600 Manually using tplinkrepeater.net

The user can set up its TP-Link repeater manually. Follow the below mentioned instructions to setup the Tp-link RE650 Repeater using the default web URL tplinkrepeater.net

1. The TP-Link RE650 can be connected to your computer wirelessly or with an Ethernet cable.
2. Launch the browser on the connected computer, then enter http://tplinkextender.net default IP 192.168.0.254 in the address bar.
3. After entering the default TP-Link extender login information, click Login.
4. When you click on Quick Setup, you will be asked to select an operation mode.
5. Select Wireless and then Range Extender as your operation mode.
6. Click Search, and a list of networks will appear on the computer screen.
7. Choose your wireless router’s SSID and click Connect. You need to enter the WIFI password for your home Wi-Fi network.
8. Select WPA-PSK/WPA2-PSK and then enter the password in the passphrase field.
9. Your TP-Link RE650 has been successfully linked to the router.

Note: The TP-Link RE650 should have the same security settings as your home router.

How to Set Up TP-Link RE650 Repeater via WPS Button

1. Connect the RE650 to the power outlet.
2. Place the TP-Link RE650 device near your router.
3. When the extender is turned on, the power LED will blink a steady green light.
4. To turn on WPS, go to your router and push the WPS button on the back panel.
5. Please proceed to press the WPS button on the TP-Link RE650 within 2 Minutes.
6. Wait until both the router and the TP-Link extender’s LED lights turn solid.
7. If your range extender has two bands, repeat Steps 4 and 5.
8. Place the range extender midway between the router and the dead zone.

Note- If the WPS function is not available on your primary router, you cannot use this method.

How to LOG IN TO TP-LINK RE650 AC2600 Repeater?

1. Launch the browser on the connected computer, then enter http://tplinkextender.net or 192.168.0.254. A login screen will appear.
2. Fill in the defult username and password for Tplink RE650 (defult username is “admin” and the password is “password”)
3. Once logged in, you can access all the settings for your Tplink Repeater.

Firmware update for TP-LINK RE650 Repeater

1. Launch the browser on the connected computer, then enter http://tplinkextender.net or 192.168.0.254. A login screen will appear.
2. Fill in the defult username and password for Tplink RE650 ( the defult username is “admin” and the password is “password“)
3. Go to “System Tools” and navigate to “Firmware Upgrade“.
4. Download the latest firmware update file from the official website.
5. Click on Browse and locate the file.
6. Once selected, click on Upgrade. It will take up to 2 minutes to update the firmware to the latest.
7. Make sure you do not unplug the Tp-Link RE650 Repeater while it’s upgrading.