Setup TP-Link RE300 AC1200 Range extender. TP-Link RE300 AC1200 has external dual-band Wi-Fi that helps to abolish the dead zone areas from your home. RE300 operates on both bands 2.4GHz(300Mbps) and 5GHz (867Mbps) for steady wireless experience. Also have smart indicator that helps to search the perfect place for favourable Wi-Fi coverage through signals. This extender setup is very east to perform with web browser, WPS and Tether App. Also works with any Wi-Fi router or wireless access point.

TP-Link RE300AC1200 Extender setup via web domain

1. Firstly need to unbox TP-Link RE300 Range extender.
2. Now attach the antennas with extender and set the extender in the right direction.
3. Ensure the internet signals, in case the signals are not steady then try to stable it.
4. Further connect modem, PC and extender with the Ethernet port.
5. Then from your connected device and open any web browser, in the address bar type www.tplinkrepeater.net or 192.168.0.254 and click enter.
6. Moreover you will see the login page here enter the credentials username and password as admin.
7. Then select your country, time and the language on setup wizard.
8. Here it will automatically scan your available list of Wi-Fi in your area.
9. Among that list select your main Wi-Fi and enter the password.
10. Setup for TP-Link extender is successfully done.

TP-Link RE300AC1200 Extender setup via WPS

1. Firstly unbox the TP-Link RE300 extender.
2. Then attach the antennas with extender and place it close to router.
3. Now check your internet signals, in case you find it not steady then fix it.
4. Hereplug your extender to power socket.
5. Now check power on both the extender and router.
6. Further press and hold the WPS button on the extender and in the same time within two minutes press and hold on router also.
7. Moreover it will start catching the settings and the LED also starts blinking.
8. Lastly your TP-LinkAC1600 extender is successfully setup.

TP-Link RE300 AC1200 Extender setup via Tether App

1. Firstly unbox the TP-Link RE300extender.
2. Ensure to plug in your extender and check the LED on extender is on.
3. Now from your connected device open any play store and search Tether app and download it.
4. Then open the Tether App and enter all the details of extender.
5. Further you will find a QR code on the extender scan it.
6. Moreover it will start catching the settings.
7. Finally the extender is setup and ready to boost your network.

TP-Link RE300AC1200Range Extender Firmware update

1. First open any web browser from connected device and enter www.tplinkrepeater.net or 192.168.0.254 in the address bar.
2. Now you need to login, username and password use as admin and click Enter.
3. Further go to advanced settings and here check for the firmware update, if any click on it.
4. Then it will take around few seconds to update the firmware.
5. Lastly your Firmware is update.