TP-Link RE400 AC1600 range extender helps to boost the network. It also helps to abolish the dead zone areas from your home/office. Also offer good performance of extender and get speed up to 300Mbps on 2.4GHz and 1300Mbps on 5GHz. Extender have gigabit external ports as wireless adapter. Also, RE400 is well renowned for its security features and signals helps to serve the network at every corner of home/office. RE400 is very easy to set up and effortlessly done with three methods, web domain, WPS and Tether App. The Tether app is used as smart management of the device.

TP-Link RE400 AC1600 Extender setup via web domain

1. Firstly need to unbox TP-Link AC1600 Range extender.
2. Then attach the antennas with extender and set the extender in the right direction.
3. Make sure the internet signals, in case the signals are not steady then try to stable it.
4. Moreover connect modem, PC and extender with the Ethernet port.
5. Now from your connected device and open any web browser, in the address bar type www.tplinkrepeater.net or 192.168.0.254 and click enter.
6. Then you will see the login page here enter the credentials username and password as admin.
7. Further select your country, time and the language on setup wizard.
8. Now it will automatically scan your available list of Wi-Fi in your area.
9. Among that list select your main Wi-Fi and enter the password.
10. Setup for TP-Link extender is successfully done.

TP-Link RE400 AC1600 Extender setup via WPS

1. Firstly unbox the TP-Link AC1600 extender.
2. Now attach the antennas with extender and place it close to router.
3. Here check your internet signals, in case you find it not steady then fix it.
4. Then that plug in your extender to power socket.
5. Now check power on both the extender and router.
6. Further press and hold the WPS button on the extender and in the same time within two minutes press and hold on router also.
7. Moreover it will start catching the settings and the LED also starts blinking.
8. Lastly your TP-LinkAC1600 extender is successfully setup.

TP-Link RE400 AC1600 Extender setup via Tether App

1. Firstly unbox the TP-Link AC1600 extender.
2. Make sure to plug in your extender and check the LED on extender is on.
3. Then from your connected device open any play store and search Tether app and download it.
4. Further open the Tether App and enter all the details of extender.
5. And you will find a QR code on the extender scan it.
6. Now it will start catching the settings.
7. Finally the extender is setup and ready to boost your network.

How to login to TP-Link RE400 AC1600 Range extender?

1. Firstly open any web browser from your connected device.
2. Now enter www.tplinkrepeater.net or 192.168.0.254 in the address bar and click enter.
3. Then you will see the login page here enter default username and password as admin.
4. Successfully you logged in into settings.

TP-Link RE400 AC1600 Range Extender Firmware update

1. First open any web browser from connected device and enter www.tplinkrepeater.net or 192.168.0.254 in the address bar.
2. Then you need to login, username and password use as admin and click Enter.
3. Now go to advanced settings and here check for the firmware update, if any click on it.
4. Moreover it will take around few seconds to update the firmware.
5. Finally your Firmware is update.

TP-Link RE400 AC1600 Range Extender firmware update via Tether App

1. First open play store from your device.
2. Then search for Tether app and download it.
3. Now open the app and fill all the information of the extender and click on settings.
4. Click on Firmware update.
5. Here from now you will receive notifications for latest firmware.
6. Finally your extender has the updated Firmware now.

TP-Link RE400 AC1600 Range Extender web domain Reset

1. First from your device open any web browser.
2. Now in the address bar type www.tplinkrepeater.net or 192.168.0.254 and click to enter.
3. Then the login page appears, enter the credentials as admin and click to log in.
4. Moreover click on advanced settings and further click on factory reset.
5. Further your extender is in the default settings.
6. So here again set up your extender with same method.

TP-Link RE400 AC1600 Range Extender Hard Reset

1. Firstly find the reset button on the extender.
2. Grab the paper clip or pin and press & hold the reset button for few seconds.
3. Once you see the LED starts blinking then release the reset button.
4. Now you will find the lights get steady.
5. Then your TP-Link extender is in default setting.
6. Lastly now again set up the extender.