- How to reset TP-Link extender?
If you having an issue to setup a TP Link extender. So, we are here to provide you solution for this. How to reset a TP-Link extender is simple and easy to operate. TP-Link gives guidelines on how to reset your TP-Link extenders without any problem. There are 2 methods to reset the TP-link Extender.
Method 1 –
If your extender comes with a reset button if your range extender comes a reset button, you may proceed. Follow the steps here below –
1. Firstly power on your TP-Link extender.
2. Then, locate the reset button at the rear of your device.
3. And the press and hold the button for some seconds.
4. Release the button once the range extender reboots.
Now extender is reset to the factory default settings. You have to find the lights flashing and then going off. You can log in to the administrator panel using the default username and password and confirm the changes.
This method is used for the select few range extenders from TP-Link that do not come with a reset button. However, these range extenders do have a reset option, and you will need a pin or similar object to reset your device.
The technique includes a hidden reset option. You will need to use a pin or similar sharp object to press and hold the reset switch. You can keep it for around 8 to 10 seconds. Check the lights flashing and coming back on one by one gradually.
Once all the lights are steady, and the range extender has rebooted, it will be back to the factory default settings.
