Worried that Why can’t log into my TP-Link Router? Don’t worry we will help you out, read this article carefully and you will get rid of this login issue.
Reasons
1. We recommend checking the connection of your device and if you are connected with the Ethernet cable for connection then check the plugs are properly connected.
2. While you are logging in to the web interface check the default domain name and the password must be correct. Also while entering the link makes sure you are entering in the address bar.
3. And when you successfully logged in then make sure you are entering the username and password correctly and should be in lower case letters.
4. In case still didn’t work then, must restart the TP-Link device by just pressing the start button on it.
5. We also recommend you to not connect the other modem or server with the TP-link device; it may cause the running of the web-based management server.
6. Lastly if still cannot fix the issue then just contact TP-Link support and provider the IP address and Gateway you found.
Must read the steps that will help you login TP-Link to the router. Follow the below steps carefully you will successfully log in to the TP-Link router.
To configuration on your TP-Link router, you have to be logged in.
Connect to the TP-Link Network
1. Firstly connect to the network that reaches the TP-Link login IP and its control panel.
2. To connect to the TP-Link network, you need to wireless or wired medium.
3. If you don’t remember the Wi-Fi password, then good solution is to connect to the network using an Ethernet cable. It does not need a password.
1. Firstly, Power on the router and connect your PC to the router by using an Ethernet cable.
2. Then, when it is connected, open an internet browser and head over to 192.168.0.1 or https://tplink-repeater.net/
3. After that, set your router login password by entering it twice.
4. Then, Click on Let’s Get Started/Login.
5. Follow the on-screen instructions and configure your Internet and Wireless Network using the Quick Setup option.
6. After this, enter the name (SSID) for your Wireless Network in the given field and also, set a password to secure your Wi-Fi network.
7. Moreover, you can complete the procedure, after which you will be able to join the Wireless Connection with the SSID using your password.
