If you arehaving issues set up your TP-Link Extender as an Access point. Then you must read this article we will guide you on How to use the Tp-link Wi-Fi extender as an access point? We will help you to solve this problem easily. Just follow these steps very carefully and you will get a solution to this issue. So let’s start with the particulars of the TP-Link extender and then the steps to set up the TP-link as an access point.
TP-Link Extender
TP-Link extender provides powerful connectivity from every corner of your house. This extender boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly. It is Compatible with 802.11 b/g/n and 802.11ac Wi-Fi devices. Dual-band speeds up to 750Mbps. It has miniature size, you can even move it simply or wall-mount it as per your satisfaction. This extender can also be used as a wireless adapter. So, you can connect wired devices with a single Ethernet port.
- How to setup TP-link Extender as an access point?
1. Firstly, make sure to plug the extender into an electrical outlet.
2. Hold on till Power LED turns light green. If the Power LED does not light, press down the Power On/off button.
3. After that use an Ethernet cable to connect the Ethernet port on the extender to a router Ethernet LAN port or a remote 4. Ethernet LAN jack with LAN access. The extender joins the LAN and creates a Wi-Fi hotspot.
4. Also, use a Wi-Fi network manager on a PC or Wi-Fi device to find and connect to the NETGEAR_EXT (SSID) Wi-Fi network. After the connection with the PC or Wi-Fi device is established and the Device Link LED lights.
5. Then open any web browser and in the address bar enter www.mywifiext.net and New Extender Setup screen displays.
6. Further, click the NEW EXTENDER SETUP. The Extender Setup screen shows.
7. Then complete the fields on the Extender Setup screen and click the NEXT button.
8. Now click the ACCESS POINT button. Set the network name (SSID), security option, and password for each access point network, and click the NEXT button. Your settings are applied. The extender is ready to be used as TP-link Extender as an access point
9. Finally, use a Wi-Fi network manager on the computer or Wi-Fi device to connect to the new access point Wi-Fi network.
