TP link extender boosts your existing wireless network and determines the weak signals issue. TP-Link products contain High-Speed Cable Modems, wireless routers, mobile phones, range extenders, routers, IP cameras, print servers, wireless adapters, power banks, USB Hub, and SMART home technology devices.
Here is the TP-Link Wi-Fi extender manual instructions for setting up the Wi-Fi Range extender is following below:-
1. Firstly, turn on the extender.
2. Then, insert the device into an electrical outlet.
3. After that check, if the extender is located closer to the router.
4. Another step is to connect the router to the extender.
5. If the device is associated with a Windows system.
6. Then, detach the Ethernet cable connected to the PC.
7. And, Locate the Wi-Fi icon at the bottom of the screen.
8. Click the Connect option adjacent to the extender name.
9. Remove the Ethernet cable connected to the system if you are using a Mac system.
10. Moreover, Locate the Wi-Fi icon on top of the screen.
11. Choose the connect option next to the extender name.
12. The other step is to configure the extender to the network.
13. Open the web browser and type the manufacturer’s address in the address bar and type admin for both the username and password.
14. Choose Login to access the webpage.
15. Click Save After customizing the settings.
Before setting up the TP-Link extender, ensure you have a router that gives an uninterrupted internet connection.
1. Firstly, connect your extender to the power supply.
2. Secondly, go to the router; press the WPS button on it and the extender as well.
3. And the WPS button on the extender could be pressed within 2 minutes. Else, the connection will fail.
4. Moreover, the router’s LED light will flicker when you press the button. The light present on your extender should also flicker.
5. On the off chance if they do not flicker, then press it again.
6. Furthermore, the process of WPS will begin in between 2 minutes. After that, check the LED for a wireless signal. If it is not lit, then the WPS process has failed.
7. If the process fails, you have to carry out the TP-Link Wi-Fi extender manual process one more time.
